Your Checklist For Installing A Commercial Generator

A commercial generator installation project is an effort that has a number of potential pitfalls if you don't plan carefully. While a generator installation service technician can handle many of these issues, it's still wise to have a checklist of concerns that have to be addressed in advance. These four items definitely deserve a place on that list.

Fuel Type

The type of fuel you use at a site has to match what you expect the generator to do. For example, folks at a hospital will need something that can keep running indefinitely, such as a system powered by natural gas. On the other hand, a generator installation at a construction site to provide lighting during the night might be able to get away with running on gasoline because someone will be there to occasionally top it off.


Commercial-grade generators can get pretty big. Especially if you're installing one permanently on a floor that sits above another, even above just the basement, it's important to do a structural survey to determine if there's enough support to handle the system's weight.

Location, Location, Location

Where a generator will be situated on your site is important, too. Particularly in regions that get a lot of weather, being able to place an outdoor system in a spot where it might be protected at least a little bit can extend its life significantly. If you're using a supply of fuel that has to be refilled, you'll also have to think about where the tanks will be situated.

Indoor systems come with their issues, too. Especially important is making sure there's sufficient airflow to vent exhausted fumes. You'll also want to locate the system in a spot where noise and vibrations don't present a nuisance.

Getting In and Out

When a commercial generator installation service team visits your site, they're going to want to have an easy way to get in and out. If a system is being installed in a subbasement, for example, the technicians will need a way to get components in for assembly. They also will need a spot outside where they can park vehicles and stage equipment.

Have the professionals doing the work conduct a walkthrough a few weeks in advance of starting the project, if possible. They'll figure out the best ways in and out with equipment, parts, and waste. Have them provide you with detailed notes and a map explaining where they'll be going and what needs to be cleared out.